GRASS VALLEY OCP 400 - Color Button

OCP 400 Operational Control Panel User’s Guide (v12.0) 45
Chapter 4 - Operation
Knee in Compatibility Mode (LDX Series Flex camera and other cameras):
4.5.5 Color button
– Press the COLOR button to open the color menu.
Menu Selections Function Level Possible values
Knee 
page 1
Knee Sel Knee function S Auto, Var, Off
Kn Point Knee point S 0..99
Kn Slope Knee Slope S 0..99
Kn Source Knee source selection B Y, NAM
Knee 
page 2
Knee Desat Knee desaturation function B On, Off
Desat Level Knee desaturation level B 0..99
Kn Source Knee source selection B Y, RGB, Max
-
Knee 
page 3
WhiteClip Switches White Clipper on or off B On, Off
Wclip Lvl Sets White Clipper Level B 0..99
-
-
Menu Selections Function Level Possible values
Color
page 1
Col Temp Selects color temperature
memory
S 3200K, 5600K, 7500K, AW1,
AW2, AWC, FL
Var Ctemp Selects variable color
temperature
S 2000K .. 21000K
Saturation Sets saturation Level S 0..99
Tint Green/Magenta tint adjustment S -150 .. 150
Color
page 2
Corrector Turns color correction on or off B On,Off
Col Filt Selects electronic colour filter S -100 .. 100
COLCORR Go to the color correction menu
Chroma Switches Chroma on or off S On, Off
Color
page 3
Protect Switches Color Protect on or off S On,Off
Level Selects Color Protect Level S 0% .. 150%