GRASS VALLEY OCP 400 - Variable Matrix and Shading

28 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 3 - Setup
3.5.1 Variable matrix and shading
The Variable Matrix and Shading menus are submenus of the camera setup menu.
Menu Selections Function Level Possible values
Variable
Matrix
page 1
G->R Sets the green to red ratio. F 0..99 (50)
B->R Sets the blue to red ratio. F 0..99 (50)
R->G Sets the red to green ratio. F 0..99 (50)
B->G Sets the blue to green ratio. F 0..99 (50)
Variable
Matrix
page 2
R->B Sets the red to green ratio. F 0..99 (50)
G->B Sets the green to blue ratio. F 0..99 (50)
-
-
Menu Selections Function Level Possible values
Shading
page 1
Shading Turns shading on or off F On, Off
-
-
-
Shading
page 2
R-SAW H Sets the horizontal sawtooth
value (for red)
F 0..99 (50)
R-PAR H Sets the horizontal parameter
(for red)
F 0..99 (50)
R-SAW V Sets the vertical sawtooth value
(for red)
F 0..99 (50)
R-PAR V Sets the vertical parameter (for
red)
F 0..99 (50)
Shading
page 3
G-SAW H Sets the horizontal sawtooth
value (for green)
F 0..99 (50)
G-PAR H Sets the horizontal parameter
(vor green)
F 0..99 (50)
G-SAW V Sets the vertical sawtooth value
(for green)
F 0..99 (50)
G-PAR V Sets the vertical parameter (vor
green)
F 0..99 (50)
Shading
page 4
B-SAW H Sets the horizontal sawtooth
value (for blue)
F 0..99 (50)
B-PAR H Sets the horizontal parameter
(for blue)
F 0..99 (50)
B-SAW V Sets the vertical sawtooth value
(for blue)
F 0..99 (50)
B-PAR V Sets the vertical parameter (for
blue)
F 0..99 (50)