GRASS VALLEY OCP 400 - Delete;Rename Menu; Read;Write Attribute Menu

38 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 4 - Operation
4.4.5 Delete/Rename menu
Select a scene file from the list. Select DELETE to delete the selected scene file. Select
RENAME to change the name of the selected scene file. Refer to the Recall/Store section to
enter a new filename.
☞
Note
☞
Note
Camera scene files can not be deleted.
4.4.6 Read/Write attribute menu
Select a scene file from the list. Select ATTRIB to change the Read/Write status of the selected
scene file. A scene file can have a Read Only (R) status and a Read/Write (R/W) status.
☞
Note
☞
Note
Read/Write attributes of a camera scene file can not be changed.
TOGGLE
PREV NEXT
EXIT
Scam1
CardScene1
SCam2
<new file> RENAME
DELETE
Go to the Read/Write
attribute menu
TOGGLE
PREV NEXT
EXIT
Scam1
CardScene1
SCam2 R/W
<new file>
ATTRIB
Go to the Copy
files menu