GRASS VALLEY OCP 400 - Adjusting Video Parameters

OCP 400 Operational Control Panel User’s Guide (v12.0) 41
Chapter 4 - Operation
4.5 Adjusting video parameters
4.5.1 Skin button
– Press the SKIN button to open the skin menu.
When the skin colour and width pages are selected, the upper and lower red and blue rotary
controls are assigned to these parameters. The SKIN lights light.
Skin 1 menu
Menu Selections Function Level Possible values
SKIN
page 1
SKIN SEL Turns Skin Detail off or on and
selects the memory position.
B Off, 1, 2, 3, 1+2, 1+3, 2+3,
1+2+3
SET 3 Go to SET SKIN 3 menu B
SET 1 Go to SET SKIN 1 menu B
SET 2 Go to SET SKIN 2 menu B
SKIN
page 2
Flw Zoom Skin detail follows Lens zoom B On, Off
-
-
-
Menu Selections Function Level Possible values
SET SKIN1
page 1
SKIN SEL Select SKIN B Off, 1, 2, 3, 1+2, 1+3, 2+3,
1+2+3
SKIN1 LVL Sets SKIN1 detail level B 0..99
SKIN VIEW Turns on to view the selected
SKIN detail area
BOn,Off
SKIN Auto Starts Auto Skin procedure B Off, Win, Run, Fail
SET SKIN1
page 2
COLOR1 R Adjust Skin 1 Color R Level B 0..99
COLOR1 B Adjust Skin 1 Color B Level B 0..99
WIDTH1 R Adjust Skin 1 Width R Level B 0..99
WIDTH1 B Adjust Skin 1 Width B Level B 0..99
SET SKIN1
page 3
ViewInsert Skin view insertion point B Main, BS Mon
-
-
-