GRASS VALLEY OCP 400 - Setting Skin Detail

42 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 4 - Operation
Skin 2 menu
Skin 3 menu
4.5.2 Setting Skin detail
Skin Detail is set up to select a particular color range. The detail level within this color range
can then be set independently of the rest of the picture.
Skin detail is predominantly used to reduce the level of detail in a person’s skin tone to produce
a more attractive picture. Decreasing the detail level of a person’s skin softens the skin tones
only. The skin detail function is not limited to a particular color and so can also be used to
achieve various effects in selected color areas. For example, decrease the detail level of a
Menu Selections Function Level Possible values
SET SKIN2
page 1
SKIN SEL Select SKIN B Off, 1, 2, 3, 1+2, 1+3, 2+3,
1+2+3
SKIN2 LVL Sets SKIN detail level B 0..99
SKIN VIEW Turns on to view the selected
SKIN detail area
BOn,Off
SKIN AUTO Starts Auto Skin procedure B Off, Win, Run, Fail
SET SKIN2
page 2
COLOR2 R Adjust Skin 2 Color R Level B 0..99
COLOR2 B Adjust Skin 2 Color B Level B 0..99
WIDTH2 R Adjust Skin 2 Width R Level B 0..99
WIDTH2 B Adjust Skin 2 Width B Level B 0..99
SET SKIN2
page 3
ViewInsert Skin view insertion point B Main, BS Mon
-
-
-
Menu Selections Function Level Possible values
SET SKIN3
page 1
SKIN SEL Select SKIN B Off, 1, 2, 3, 1+2, 1+3, 2+3,
1+2+3
SKIN3 LVL Sets SKIN3 detail level B 0..99
SKIN VIEW Turns on to view the selected
SKIN detail area
BOn,Off
SKIN Auto Starts Auto Skin procedure B Off, Win, Run, Fail
SET SKIN3
page 2
COLOR3 R Adjust Skin 3 Color R Level B 0..99
COLOR3 B Adjust Skin 3 Color B Level B 0..99
WIDTH3 R Adjust Skin 3 Width R Level B 0..99
WIDTH3 B Adjust Skin 3 Width B Level B 0..99
SET SKIN3
page 3
ViewInsert Skin view insertion point B Main, BS Mon
-
-
-