GRASS VALLEY OCP 400 - Page 48

48 OCP 400 Operational Control Panel User’s Guide (v12.0)
Chapter 4 - Operation
– The optical filter wheels are controlled with the ND and FX UP and DOWN selection
buttons.
*) Not available on LDX Flex version.
Gradient Filter menu (LDK 500 only)
Soft Focus Filter menu (LDK 500 only)
Menu Selections Function Level Possible values
Filters
page 1
ND Up Increase ND Filter position S CLR, ND 1/4, ND 1/16, ND 1/64
FX Up *) Increase FX Filter position S CLEAR, 4 Star, 6 Star,Soft Focus
ND Down Decrease ND Filter position S
FX Down *) Decrease FX Filter position S
Filters
page 2
[LDK 500
only]
Gradient Select electronic gradient filter B On, Off
SET Go to Set Gradient page B
Soft Fcs Select electronic soft focus filter B On, Off
SET Go to Set Soft Focus page B
Filters
page 3
[LDK 500
only]
Monotone Select electronic monotone
filter
BOn, Off
SET Go to set monotone filter page B
-
-
Menu Selections Function Level Possible values
Gradient
filter page 1
[LDK 500
only]
Gradient Turns gradient filter on or off B On, Off
Preset Selects gradient filter presets B ND0.3/0.6/0.9, Sunset, BlueSky,
Var
Zone Selects area of gradient filter B Top, Left, Bottom, Right
View Selects view mode B On, Off
Gradient
filter page 2
[LDK 500
only]
Gradient Turns gradient filter on or off B On, Off
-B
Centre Sets center position B 0..99
Width Selects transition width B 1,2,3,4,5,6,7
Gradient
filter page3
[LDK 500
only]
Gradient Turns gradient filter on or off B On, Off
Depth R Set red color depth B 0..99
Depth G Set green color depth B 0..99
Depth B Set blue color depth B 0..99