93
Data is stored successfully: It means that the setup data, waveform data and
image data are already stored in the oscilloscope or the USB flash disc.
Data is read successfully: It means that the setup data or the waveform data is
successfully called out from the oscilloscope or the USB flash disc.
USB storage device is unconnected: This message will be prompted if the USB
flash disc is not plugged for storage when the option “store to” is set as “USB
flash disc” or the option “PRINT BUTTON” is set as “stored image” in the menu
“SAVE/RECALL”.
Waveform recording is finished: The system will prompt this message when
waveform recording is ended.
To Next Page
Loading...
