97
Special On or Off
SWPR works by quickly sweeping
the RF spectrum in 1 MHz incre-
ments to find nearby strong sig-
nals. If the 1 MHz sweep indicates
that activity is present in the 1 MHz
range, SWPR sweeps that range to
find the source.
Search Dir Up or Down
Sets search direction used when
SWPR object is active.
Hit Count Numeric value
Increments each time a transmis-
sion is received on the SWPR ob-
ject. Global “Hit Counts” must be
set to ON. Press the
Dflt
softkey
to reset to 0.
To Next Page
Loading...
