Greenline 40
58
WARNING!
The bilge pump system is not designed to maintain the buoyancy of the
boat in case of damage.
It is intended for driving out the water coming from sea spray or leaks,
but absolutely not from a hole in the hull resulting from a damage.
SANITARY APPLIANCE OPERATION
MARINE HEADS OPERATION:
Ensure that the water supply and discharge valves are open before using the head.
To drain the bowl, set the pump lever to "FLUSH" and actuate the pump. To empty the bowl, set the pump
lever back to "DRY" and actuate the pump.
Use exclusively absorbent, biodegradable paper to avoid clogging the heads and rinse the system regularly
with fresh water.
Shut the valves after every use and especially when the boat is unattended.
WASH BASINS AND SHOWERS OPERATION:
The valves and cocks should be closed after use. To drain the shower tub, actuate the pump switch.
CAUTION!
The system should be emptied during storage at freezing
temperatures.
RECOMENDATION!
During shore stay, use if possible the club-house sanitary appliances.
Waste water rejection is restricted in some country or marina; Waste tank is necessary.
To Next Page
Loading...
