GREENLINE 40 - Selecting Electric or Diesel Drive

Greenline 40 61
SELECTING ELECTRIC or DIESEL DRIVE
ELECTRIC DRIVE
Make sure that the engine throttle lever is in neutral
position.
Set the Hybrid switch to ELECTRIC.
Turn the DIESEL engine keys to the »ON« position.
-GREEN LIGHT on the panel switches on.
Wait for app. 5 seconds for the system to set to the
electric drive.
Ready to sail
Switching the Electric drive OFF –Turn the DIESEL
engine keys to the »OFF« position.
GREEN LIGHT on the panel switches off.
DIESEL DRIVE
Make sure that the engine throttle lever is in neutral
position.
Set the Hybrid switch to DIESEL.
Turn the DIESEL engine keys to the »ON« position.
- YELLOW LIGHT on the panel switches on.
-»NEUTRAL« should appear on the VW control
display ( if not, check the position of the throttle lever ).
Turn the DIESEL engine keys to the »START« position
to start the engines.
Ready to sail.
Switching the Diesel drive OFF – Turn the DIESEL
engine keys to the »OFF« position.
YELLOW LIGHT on the panel switches off
There are also important monitors for the hybrid drive parameters. For details see Hybrid monitoring (chapter
3.) propulsion/generator and Battery monitoring – BMV.
CAUTION!
If switching from electro to diesel (step 1) after step 2: first put the
throttle lever in neutral, turn the hybrid switch to diesel and wait for 5
seconds before starting the diesel engines, allowing the clutches to
reconnect the diesel engines.