GREER Company
1918 East Glenwood Place
Santa Ana CA 92705
Page 15 of 44
MicroGuard
®
586 Operation/Setup Manual
W458200 REV C 10/29/02
Approaching Overload
• The System monitors the weight of the load
suspended below the boom head.
The System compares this information with
rated capacity data stored within the computer.
•
When the rated capacity of the configuration
reaches 90%, the bar graph in the window of
the display console progresses from the
normal (green-bordered) zone into the caution
(yellow-bordered) zone.
• A yellow light above the caution zone of the
bar graph lights up and an alarm beeps
continuously.
• The message
“WARNING! – PRE-ALARM” will flash in the
information portion of the screen.
OK
DISPLAY
SETUP
SETUP CODE
STOP
RATED CAPACITY
MG-586
!
SELECT
CONTRAST
Yellow Lamp
To Next Page
Loading...
