Baserunner V6 User Manual
Rev0
extra power lost due to field weakening. We can see that at 20 amps of field
weakening, the motor speed increases from 310 rpm to 380 rpm, while the no
load current draw is still just under 3 amps.
7.6 Virtual Electronic Freewheeling
Dashboard/Basic Setup tabs
The Baserunner V6 controller can be set to inject a small amount of current into
the motor, even when the throttle is off. When properly tuned, this current
injection can overcome the drag torque present in hub motors capable of
regenerative braking, allowing them to spin freely when pedaling without any
throttle.
To setup this feature, we recommend first going to the “Dashboard” tab. With the
system running under throttle with no load on the motor, note the “Motor Current”
value.
To Next Page
Loading...
