Grundfos Control MPC 2000 Series User Manual

English (GB)
6
5. Product introduction
Fig. 1 Control MPC
5.1 Product description
Grundfos Control MPC is mainly used for control and monitoring
of booster and circulation systems.
Control MPC consists of a control cabinet with a built-in controller,
CU 352.
The control cabinet contains all necessary components such as
main switch, contactors, IO modules and cabling.
In systems with external frequency converters, the frequency
converters can be installed in the cabinet.
The control cabinet is for wall or floor mounting.
5.2 Applications
Control MPC is mainly used for control and monitoring of pumps
in these applications:
• booster systems
• circulation systems for heating, cooling and air-conditioning.
5.2.1 Pumps
Control MPC is designed for systems with these pumps:
• CR, CRE, CRI, CRIE, CRN, CRNE, CRIE
• NB, NBE, NBG, NBGE
• NK, NKE, NKG, NKGE
•TP
•TPE 3
• TPE Series 1000
• TPE Series 2000
•HS
•SP
• MAGNA, UPE Series 2000.
5.2.2 Control variant
Control MPC is divided into five groups based on the control
variant:
See also section 6. Overview of control variants.
Control MPC includes software for pressure boosting, heating
and cooling.
TM05 3232 1012 - TM05 3233 1012
The main pumps of the system must be of the same
type and size.
Control
variant
Description
-E
Two to six pumps with integrated frequency
converter (0.37 - 22 kW).
-EC
Two to six pumps connected to a Grundfos CUE
frequency converter - one per pump.
Series 2000
Two to six MAGNA, UPE, TPE 3 or TPE Series
2000 pumps
-F
Two to six pumps connected to a Grundfos CUE
frequency converter. The speed-controlled
operation alternates between the pumps.
-S Two to six mains-operated pumps

Grundfos Control MPC 2000 Series Specifications

General

Brand	Grundfos
Model	Control MPC 2000 Series
Category	Control Systems
Language	English