GSE 355 - Set Time & Date; Model 350; Model 355

AWT35‐500349|June2009 Page11
3.4 Set Time & Date
The time and date feature is stored as non-volatile (time/date setting will not be lost when the unit power is
reset).
The time and date can be accessed from the weigh mode with the
! key if the time/date parameter has
been enabled. Time and date can be accessed via the communication port by sending 11%s.
3.4.1 Model 350
To enter the date from the Enter~date~01.01.70 prompt
EXAMPLE: 01.09.09 (January 9, 2009)
1. Press
 to toggle through the numbers to enter the month.
2. Press
2 twice to move the decimal point over to separate the month from the day. It is not necessary to
enter a 0 before a single digit month. If it is a double-digit entry, press
2 once to move the cursor and
then
 to scroll through the digits.
3. Press
 to toggle through the numbers to enter the day.
4. Press
2 twice to move the decimal point over to separate the day from the year. It is not necessary to
enter a 0 before a single digit month. If it is a double-digit entry, press
2 once to move the cursor and
then
 to scroll through the digits.
5. Press
 to toggle through the numbers to enter the year.
6. Press
2 once to move the cursor and then press  to scroll through the digits.
7. Press
1 twice to accept the entry.
To enter the time from the Enter~tine~00.00.00 prompt
EXAMPLE: 16.32.41 (4:32:41 P.M.)
1. Press
 to toggle through the numbers to enter the hour. Hours must be entered as military time.
2. Press
2 once to move the cursor. Press  to select the next digit.
3. Press
2 twice to move the decimal point over to separate the hour from the minutes. It is not necessary
to enter a 0 before a single digit hour.
3.4.2 Model 355
To enter the date from the Enter~date~01.01.70 prompt
EXAMPLE: 01.09.09 (January 9, 2009)
1. Key in the date in the following format: 1.9.9. It is not necessary to enter a 0 before a single digit month.
2. Press
( to except the date and move to the time entry. Press ( again to bypass the time entry.
To enter the time from the Enter~tine~00.00.00 prompt
EXAMPLE: 16.32.41 (4:32:41 P.M.)
1. Key in the date in the following format: 16.32.41
2. Press
( to except the time and move to the weigh mode.