GSE 355 - 3.13 Batch 2; 3.13.1 Enter a Target

AWT35‐500349|June2009 Page27
3.13.2.1 Annunciators
Status Annunciator Status Annunciator Color (LED)
Fill 1 SP 1 Illuminated
Relay 1 Contacts Closed,
Relay 2 and 3 Contacts Open
Fill 2 SP 2 Illuminated
Relay 2 Contacts Closed,
Relay 1 and 3 Contacts Open
Fill 3 SP 3 Illuminated
Relay 3 Contacts Closed,
Relay 1 and 2 Contacts Open
3.13.3 Batch2 Example
With a system set up a system to make a 50,000 lb batch with water (30,000 lbs.), corn syrup (15,000 lbs.)
and caramel color (5,000 lbs.), ingredient 1 should start with
1 and subsequent ingredients should auto-
start.
Parameter Setting Actual Cutoff Value Comments
Target 1 = 30,000 Desired water weight. Target 1 = 30,000
Based = Net
Targets are compared
to net weight.
Based = Net
Start 1 = Tare
Start water with
1
Start 1 = Tare
Target 2 = 15,000
Desired corn syrup
weight.
Target 2 = 15,000
Start 2 = Auto
Start corn syrup when
water is done and
motion has stopped.
Start 2 = Auto
Target 3 = 5,000
Desired caramel
coloring weight.
Target 3 = 5,000
Start 3 = Auto
Start caramel coloring
when corn syrup is
done and motion has
ceased.
Start 3 = Auto