GSE 355 - 5.0 Specifications; PERFORMANCE; ELECTRICAL; PROCESS CONTROL

AWT35‐500349|June2009 Page31
Protocol Selectable
Baud Rate 150 – 115200 bps
DISPLAY
LED
6-digit weight display, 0.8” (22mm) height 11 LED annunciators for
operational status
LCD (350 Only)
6-digit weight display, 1.0” (25.4mm) height 12 LCD annunciators for
operational status. Built in LCD status bargraph
KEYPAD
350 Five key, durable elastomeric rubber
355 22 key, full numeric, durable elastomeric rubber
ENCLOSURE
Zinc Die Cast Black powder coat paint, self-standing on flat surface
Wall/Ceiling Mount Optional stainless steel swivel bracket
Stainless
Washdown stainless steel enclosure w/stainless steel swivel bracket (table,
wall or ceiling mount)
OPTIONS
Analog Output Module
0–10 VDC/5mA, 0–20mA/10V, 4–20mA/10V, electrically isolated, 16 bit
resolution with up to 10 updates per second response time, mounts internal
to enclosure
Relay Output Module
Three (3) solid-state 24–280 VAC, 1A with up to 10 updates per second
response time, mounts internal to enclosure or three (3) 3– 60 VDC, 2A
Wall Mount Kit Swivel bracket/stand for zinc die cast enclosure
Panel Mount Kit Mounts zinc die cast enclosure to user panel
Cutout: 7.33” – 7.45”w x 5.25” – 5.37”h x 2.25”d
186.2 – 189.2mm x 133.4 – 136.4mm x 57.2mm
Two Option Mount Kit Mounts up to two option boards inside the stainless enclosure
Battery Power Supply Kits
Two versions: one mounts inside the stainless steel enclosure, the other
mounts inside the die cast enclosure
Splash Shield
Durable adhesive plastic that adheres to the front surface of the stainless
steel enclosure model
20 mA Current Loop Enables the communication port to be a digital 20 mA current loop port.
Fiber Optic Transceiver
Model 350/355 stainless steel, installs in the safe area and connects to a
Model 350/355. Allows setpoints and/or analog output options.
Communicates with hazardous area indicator via fiber-optic cable.