PNEG-1156ETL Design III Series Grain Stir-Ator CSA 13
2. Safety Decals
The decals shown below and on Page 14 must be displayed as shown.
Replacements are available upon request. Write to the following address:
GSI Group
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
Please note:
1. The decals shown below are not shown in actual size.
2. Keep decals wiped clean at all times.
3. Decals must be replaced if they are destroyed, missing, painted over or can no longer be read.
DC-1386 - Top of gear
motor track frame.
1067021 - Both sides of bottom motor
mounting rail in trolley and both sides of
optional offset.
DC-GBC-A and DC-GBC-1S -
Should be located at any bin entry so it can
seen and easily.
DC-1948 - Both
sides of swivel
box plus junction
box cover.
Rotating flighting will
kill or dismember.
Flowing material will
trap and suffocate.
Crusted material will
collapse and suffocate.
Keep clear of all augers.
DO NOT ENTER this bin!
Failure to heed these
warnings will result in
serious injury or death.
If you must enter the bin:
1. Shut off and lock out all power.
2. Use a safety harness and safety line.
3. Station another person outside the bin.
4. Avoid the center of the bin.
5. Wear proper breathing equipment or respirator.
DC-GBC-1A
Moving parts can
crush and cut. Keep
hands clear of
sprocket and chain.
DC-1386
DC-1948
Lockout power
before servicing.
Will cause serious
injury or death.
HIGH VOLTAGE.
Vérouillez le courant
avant l’entretien.
Causera de sérieuses
blessures ou la mort.
HAUTE TENSION
To Next Page
Loading...
Need help?
General
