To Next Page

To Previous Page

4. Assembly and Installation

38 PNEG-1156ETL Design III Series Grain Stir-Ator CSA

Lifting Stir-Ator

1. The Stir-Ator is now ready to be lifted into position. Use a chain hoist, winch or block and tackle.

At the center, use the center lift hook on top of the suspension tee. (See Figure 4AI.)

Figure 4AI

2. At the bin wall, wrap the lifting mechanism around the trolley motor side of the frame rail.

(See Figure 4AJ.)

Figure 4AJ

Be sure that the lifting equipment is capable of lifting the unit. (See chart

on Page 17.)

CAUTION

Questions and Answers:

Need help?

Do you have a question about the GSi DMC Design III Series and is the answer not in the manual?

GSi DMC Design III Series Specifications

General