GSi DMC Design III Series User Manual

1. Safety
8PNEG-1156ETL Design III Series Grain Stir-Ator CSA
Prepare for Emergencies
Be prepared if fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance service,
hospital, and fire department near your telephone.
Keep Emergency Equipment
Quickly Accessible
Avoid Falls
Anchor the bottom of any ladder being used in a bin or silo
to prevent it from slipping.
Because the equipment is suspended from chains in the
center, be cautious of positioning ladder against the
equipment. The equipment can move or swing from the
weight of a person climbing on the ladder.
When setting a ladder against the equipment, a vise grip
or other type of tie down should be used in the front and
back of the track drive unit. This keeps the equipment from
rolling or sliding around the bin while service work is
being performed.
During heavy service work, such as removing auger
drive, electric motors, or replacing electrical swivel, tying
the ladder to the main frame or other solid component
is advised.
Never climb out on the main beam or augers from a ladder
or the roof manhole.
If an unusual amount of service work needs to be
performed, consider lowering the unit onto sawhorses.
Always Use Ladders Safely

GSi DMC Design III Series Specifications

General

Brand	GSi
Model	DMC Design III Series
Category	Industrial Equipment
Language	English