7 Moisture Sampler
Topics Covered in this Chapter
▪ Installing the Moisture Sampler
▪ Blower Cover Assembly Parts (D04–1016)
▪ Moisture Sampler Hose Parts (D04–1023)
▪ 220V Moisture Sampler Blower Wiring Diagram
▪ 400V Moisture Sampler Blower Wiring Diagram
▪ 480V Moisture Sampler Blower Wiring Diagram
▪ 600V Moisture Sampler Blower Wiring Diagram
Installing the Moisture Sampler
These instructions cover the moisture blower kits for 220V, 440V, 380V and 575V portable dryers.
1. Install the blower mount bracket (A) to the dryer using the middle set of holes in the center flange (B)
and secure them using bolts (C) and nuts (D).
Figure 7-1 Installing the blower mount bracket to the Dryer
A
Blower mount bracket (D01-2958) C 5/16 in. x 3/4 in. flange bolt (S-6606)
B
Center flange
D
5/16 in. flange nut (S-3611)
2. Install the top two bolts (C) to the blower assembly brackets (F) leaving space between the bolt
head and nut.
PNEG–2088 Quiet Portable Dryer
49
To Next Page
Loading...