2.1.4 Installation instructions
Protective mea-
sures
The operating company is responsible for ensuring safe conditions in the vicin-
ity of the product. In particular, he must ensure compliance with the general
safety regulations, guidelines and standards. Before commissioning the system
the operating company must check whether all the protective measures have
been implemented. These must cover all hazards. This is the only way to en-
sure that application of the product conforms to CE regulations.
As stipulated by the Machinery Directive, the protective measures must:
• Correspond to best practices
• Comply with the required safety category
Modifications
The product must never be modified or used in a manner contrary to its in-
tended use. Ü225
General rules for
occupational
safety
The generally accepted occupational safety rules must be observed and imple-
mented.
Safety SERVICE MANUAL Güdel planetary gear NR, SR, PR
9007199543219723_v1.1_EN-US
18
To Next Page
Loading...