EasyManua.ls Logo

GUDEL PR - Waste Management Compliant Assemblies; Disassembly

Default Icon
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10.3 Waste management compliant assemblies
10.3.1 Disassembly
WARNING
Suspended loads
Improper handling of suspended loads can lead to severe injuries or death!
Use appropriate lifting units
Wear appropriate protective clothing
Always keep sufficient distance from suspended loads
Never enter the area below a suspended load
WARNING
Ripping of lifting belts
The sharp edges cut the lifting belts. This can lead to severe or fatal injuries!
Always protect the lifting belts with an edge guard
CAUTION
Oil, greases
Oils and greases are harmful to the environment!
The oils and greases must not get into the drinking water supply. Take ap-
propriate measures
Observe the country-specific safety data sheets
Oils and greases must be disposed of as hazardous waste, even if the total
quantity is small
Disassemble the gearbox as follows:
1 Remove the connecting elements (cables / energy chains)
2 Disassemble the gearbox and drain the oil
3 Disassemble the assemblies and separate the different materials
The gearbox has been disassembled.
DisposalSERVICE MANUAL Güdel planetary gear NR, SR, PR
9007199543219723_v1.1_EN-US
89

Table of Contents