7.2.4 Maintenance tasks after 2,250 hours
7.2.4.1 General inspection
Performing a gen-
eral inspection
For the general inspection, perform a rough check of the entire product.
Perform the general inspection as follows:
1 Switch off the system and padlock it to secure it against being switched
on again
2 Check the inspection points as described in the inspection table
3 Take measures as described in the inspection table
The general inspection is complete.
Maintenance SERVICE MANUAL Güdel planetary gear NR, SR, PR
9007199543219723_v1.1_EN-US
48
To Next Page
Loading...