User Information
mega macs PC
Safety Precautions
2.1.4 Safety Precautions for High Voltage/Line Voltage
Very high voltages occur in electrical systems. Due to voltage flashover on damaged components,
such as marten damage or touching live components, the risk of electric shock is likely. High
voltage via the vehicle and line voltage via the building's mains supply can cause severe injury or
even death if adequate care is not taken. Therefore regard the following:
• Only use power supply cables with grounding contact.
• Only use a checked or the attached power cord.
• Always use the original cable set.
• Regularly check cables and adapters for damage.
• Perform any assembly work such as the connection of the PC VCI to the vehicle or the
replacement of components only when ignition is switched off.
• Do not touch live components when ignition is switched on.
12
To Next Page
Loading...