mega macs PC
Configuring the mega macs PC
Test Functions
2. Select >GTC<.
The GTCs appear.
10.7.3 Displaying Other Licenses
Here you can view a list of the licenses and notes of the programs and functions used by the Hella Gutmann.
Proceed as follows to retrieve licenses:
1. Select Contracts under > Settings in the main menu.
2. Select >Miscellaneous<.
A list with the licenses and notes of the programs and functions used by the Hella Gutmann appears.
10.8 Test Functions
Here you can perform various tests.
10.8.1 Precondition for Test Functions
Regard the following to perform the test functions:
• Voltage supply of the PC VCI through power adapter and mains cable is ensured.
• The PC VCI is connected with USB cable and PC.
• The PC VCI is not inserted in the vehicle's diagnostic connector.
10.8.2 Performing the VCI Plug Test
This test serves as a function check for defects in the PC VCI.
Proceed as follows to perform the test functions:
1. Select Test functions under > Settings in the main menu.
2. Start the VCI plug (USB) test with
.
The message VCI OK, no malfunction detected appears if the test was successful.
10.8.3 Performing VCI Diagnostics
This diagnostics is used to test the functionality of Bluetooth® for defects to determine data loss.
Proceed as follows to perform VCI diagnostics:
1. Insert the Bluetooth® adapter into the USB port of the PC.
41
To Next Page
Loading...