mega macs PC
Working with the mega macs PC
Vehicle Selection
11.2 Vehicle Selection
Here you can select vehicles according to the following parameters:
• Vehicle type
• Manufacturer
• Model
• Fuel type
NOTE
You require an online connection if you wish to access all available information.
Proceed as follows to select a vehicle:
1. Select >Vehicle selection< in the main menu.
2. Select >i<.
3. Activate the check box
for passenger cars, for motorcycles, or for trucks.
4. Select Vehicle database with
, or .
5. Select the requested manufacturer.
6. Select the requested fuel type.
7. Select the requested model.
8. Double-click to the requested vehicle type.
The Vehicle data menu appears.
Here you can enter either the registration number or the customer name (max. 10 characters).
9. Open the virtual keypad with
.
NOTE
If you do not enter a registration number or the customer name, the device does not store any
data of the current vehicle in the Car History.
One registration number or customer name can be used for several vehicles.
10. Enter the registration number or customer name.
11. Click
twice to confirm the input.
The input will be saved automatically.
Vehicle selection is now ready for >Diagnostics< and >Vehicle data< and the data will be stored in the >Car
history<.
The mega macs PC software switches automatically back to the main menu.
11.2.1 Identifying a Vehicle by VIN
NOTE
Reading out the VIN via PC VCI is not possible for every vehicle.
Proceed as follows to identify a vehicle by VIN:
1. Select >Vehicle selection< in the main menu.
2. Select >i<.
3. Activate the check box
for passenger cars, for motorcycles, or for trucks.
4. Select VIN identification with
.
55
To Next Page
Loading...