GUTMANN mega macs PC - Car History; Selecting Vehicles from the Car History; Deleting Entries from the Car History; Deleting Single Entries and the Entire Car History

Working with the mega macs PC
mega macs PC
Vehicle Information
This menu contains the recall campaigns of manufacturers and importers.
11.6.1 Car History
This menu provides the diagnostic results to the present vehicle from the functions >Trouble codes<, >Parameters<,
>Basic settings< and >Codings. This has the following advantages:
• You can evaluate the diagnostic results later.
• Compare previously performed diagnostics to present diagnostic results.
• You can show the customer the diagnostic results without needing to reconnect the vehicle.
11.6.1.1 Selecting Vehicles from the Car History
NOTE
Diagnostic results automatically stored here can be retrieved only if the function Automatic Car
History Transfer is set to >on< under Settings > Miscellaneous > Car History.
Proceed as follows to select a vehicle from the Car History:
1. Select >Vehicle selection< in the main menu.
2. Select the
Car History tab.
3. Double-click the required vehicle to select.
The mega macs PC software switches back to the main menu automatically.
The vehicle selected appears in the top toolbar.
11.6.1.2 Deleting Entries from the Car History
Proceed as follows to clear one or more entries from the Car History:
1. Select >Vehicle selection< in the main menu.
2. Select the
Car History tab.
3. Call up Delete Car History with
.
A drop-down list appears.
Following functions are available:
• Delete single entry
• Clear entire Car History
• All Older Than
11.6.1.3 Deleting Single Entries and the Entire Car History
Proceed as follows to delete single entries and/or the entire Car History:
1. Activate the requested check box.
2. Confirm the deletion process with
.
3. Observe the confirmation prompt.
4. Confirm the confirmation prompt with
.
The selected entries will be deleted.
78