GUTMANN mega macs PC - Performing a Factory Reset; Configuring the Car History; Automatic Car History Transfer

Configuring the mega macs PC
mega macs PC
Configuring Miscellaneous
3. Open a list under Order management with
.
4. Select >on< or >off<.
Order management is switched off or on. The selection will be saved automatically.
10.6.1.4 Performing a Factory Reset
Here you can reset the mega macs PC software to factory settings.
The following data and files will be reset to the state of delivery if you do the factory reset:
• Data stored in the Car History
• Downloaded files such as wiring diagrams or service schedules
• User data such as company data
The following functions will be also modified or deleted:
• IP address mode
• Telekom HotSpot
• Bluetooth® MAC address
• asanetwork
• Display settings
• Confirmation of General terms and conditions
• Printer settings
Proceed as follows to perform a factory reset:
1. Select Miscellaneous under > Settings in the main menu.
2. Select >Miscellaneous<.
3. Start Factory reset with
.
4. Observe the confirmation prompt.
5. Confirm the confirmation prompt with
.
The mega macs PC software will be automatically reset to the condition at delivery.
10.6.2 Configuring the Car History
This menu provides the diagnostic results to the present vehicle from the functions >Trouble codes<, >Parameters<,
>Basic settings< and >Codings. This has the following advantages:
• You can evaluate the diagnostic results later.
• Compare previously performed diagnostics to present diagnostic results.
• You can show the customer the diagnostic results without needing to reconnect the vehicle.
10.6.2.1 Automatic Car History Transfer
If you have selected the option Automatic Car History Transfer, the data saved in the Car History will be
automatically transferred to Hella Gutmann.
Proceed as follows to transfer the Car History automatically:
1. Select Miscellaneous under > Settings in the main menu.
2. Select >Car History<.
3. Open a list under Automatic Car History Transfer with
.
38