mega macs PC
Configuring the mega macs PC
Configuring Miscellaneous
10.6 Configuring Miscellaneous
Configure the following data here:
• Other stipulations
• Car History
• Resolution
10.6.1 Configuring Other Matters
Here you can configure settings such as:
• Tips
• Demo mode
• Order management
10.6.1.1 Setting the Demo Mode
Here you can set whether the device shall give predetermined values during the vehicle communication. This setting is
mainly intended for marketing and sales presentations.
NOTE
In the course of vehicle diagnostics the demo mode must be switched off. Otherwise the device
will deliver predetermined diagnostic results and no real values.
Proceed as follows to set the demo mode:
1. Select Miscellaneous under > Settings in the main menu.
2. Select >Miscellaneous<.
3. Open the list under Demo mode with
.
4. Select >on< or >off<.
Demo mode is switched off or on.
10.6.1.2 Setting Tips
Here you can activate or deactivate additional information on different functions.
Proceed as follows to set the indication of tips:
1. Select Miscellaneous under > Settings in the main menu.
2. Select >Miscellaneous<.
3. Open the list under Tips with
.
4. Select >on< or >off<.
Tips are switched off or on. The selection will be saved automatically.
10.6.1.3 Configuring Order Management
Here you can set the data exchange between the mega macs PC software and the order management.
Proceed as follows to set the order management:
1. Select Miscellaneous under > Settings in the main menu.
2. Select >Miscellaneous<.
37
To Next Page
Loading...