GUTMANN mega macs PC - 10 Configuring the Mega Macs PC; Setting Company Data; Entering Company Data; User Name

Configuring the mega macs PC
mega macs PC
Setting company data
10 Configuring the mega macs PC
Configure all interfaces and functions under >Settings< in the main menu.
10.1 Setting company data
Enter the company data that shall appear on the hard-copy printout, e.g.:
• Company address
• Fax number
• Homepage
10.1.1 Entering Company Data
Proceed as follows to enter the company data:
1. Select Company under > Settings in the main menu.
2. Select >Company data<.
3. Open the virtual keypad under Company name with
.
4. Enter the company name.
5. Confirm your entry with
.
The input will be saved automatically.
6. Repeat steps 3-5 for further entries.
10.1.2 User name
10.1.2.1 Entering the User Name
Here you can manage the different users.
The respective user name is saved for all data stored in the Car History. This enables quicker identification of the
mechanic who performed the repair work if a query is subsequently made.
Proceed as follows to enter the user name:
1. Select Company under > Settings in the main menu.
2. Select >User<.
3. Open the virtual keypad with
.
4. Enter the user name.
5. Confirm your entry with
.
The input will be saved automatically.
10.1.2.2 Assigning a Password
Here you have the option to assign passwords to the users.
The assigned password must be entered when selecting the user.
Proceed as follows to assign a password to a user:
1. Select Company under > Settings in the main menu.
28