H3C S5560S-EI Series User Manual

4-40
10-GE SFP+
module
Central
wavelength
(nm)
Connector
Fiber
diameter
(µm)
Multimode fiber
modal
bandwidth
(MHz × km)
Max
transmission
distance
-SM1270-BIDI
nm
• RX:1330
nm
9/125
miles)
SFP-XG-LH40
-SM1330-BIDI
• TX:1330
nm
• RX:1270
nm
LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
IMPORTANT:
The
SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules and the
SFP
-XG-LH40-SM1270-BIDI and SFP-XG-LH40-SM1330-BIDI transceiver modules must be used
in pairs. For example, if one ends uses an
SFP-XG-LX-SM1270-BIDI
transceiver module, the other
end must use an SFP-XG-LX-SM1330-BIDI transceiver module.
Table4-7 SFP+ copper cables available for the SFP+ ports
SFP+ copper cable Cable length
LSWM1STK 0.65 m (2.13 ft)
LSWM2STK 1.2 m (3.94 ft)
LSWM3STK 3 m (9.84 ft)
LSTM1STK 5 m (16.40 ft)
Table4-8 SFP+ fiber cables available for the SFP+ ports
SFP+ fiber cable Max transmission distance
SFP-XG-D-AOC-7M 7 m (22.97 ft)
SFP-XG-D-AOC-10M 10 m (32.81 ft)
SFP-XG-D-AOC-20M 20 m (65.62 ft)

H3C S5560S-EI Series Specifications

General

Brand	H3C
Model	S5560S-EI Series
Category	Switch
Language	English