3
<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] description vsi for vpn1
Related commands
display l2vpn vsi
display arp suppression vsi
Use display arp suppression vsi to display ARP flood suppression entries.
Syntax
display arp suppression vsi [ name vsi-name ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name vsi-name: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you
do not specify a VSI, this command displays entries for all VSIs.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays entries on the master device.
count: Displays the number of ARP flood suppression entries that match the command.
Examples
# Display ARP flood suppression entries.
<Sysname> display arp suppression vsi
IP address MAC address Vsi name Link ID Aging
1.1.1.2 000f-e201-0101 vsi1 0x70000 14
1.1.1.3 000f-e201-0202 vsi1 0x80000 18
1.1.1.4 000f-e201-0203 vsi2 0x90000 10
# Display the number of ARP flood suppression entries.
<Sysname> display arp suppression vsi count
Total entries: 3
Table 1 Command output
Link ID Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.
Aging
Remaining lifetime (in minutes) of the ARP flood suppression entry. When
the timer expires, the entry is deleted.
Related commands
arp suppression enable
reset arp suppression vsi
To Next Page
Loading...
Need help?
General