21
service-instance instance-id: Specifies an Ethernet service instance ID in the range of 1
to 4096.
Usage guidelines
If you do not specify any parameters, this command clears packet statistics on all ACs.
Examples
# Clear packet statistics for Ethernet service instance 1 on GigabitEthernet 1/0/1.
<Sysname> reset l2vpn statistics ac interface gigabitethernet 1/0/1 service-instance 1
Related commands
ac statistics enable
display l2vpn service-instance verbose
statistics enable
(Ethernet service instance view)
reset l2vpn statistics vsi
Use reset l2vpn statistics vsi to clear packet statistics on VSIs.
Syntax
reset l2vpn statistics vsi [ name vsi-name ]
Views
User view
Predefined user roles
network-admin
Parameters
name vsi-name: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you
do not specify a VSI, this command clears packet statistics on all VSIs.
Examples
# Clear packet statistics on all VSIs.
<Sysname> reset l2vpn statistics vsi
Related commands
statistics enable (VSI view)
selective-flooding mac-address
Use selective-flooding mac-address to enable selective flood for a MAC address.
Use
undo selective-flooding mac-address to disable selective flood for a MAC address.
Syntax
selective-flooding mac-address mac-address
undo selective-flooding mac-address
mac-address
Default
Selective flood is disabled for all MAC addresses.
Views
VSI view
To Next Page
Loading...
Need help?
General