H3C S5560X-EI Series User Manual (English)

Other manuals for H3C S5560X-EI Series

Installation Guide89 pages

Configuration Guide63 pages

Questions and Answers:

L
Lisa SchultzJul 28, 2025
How to troubleshoot AC input failure on H3C Switch?
- J
  Jason NelsonJul 28, 2025
  To troubleshoot an AC input failure on your H3C Switch, take these steps: 1. Check that the AC power cord is properly connected between the switch and the AC power source, and that both the switch's AC power receptacle and the AC power outlet are in good condition. 2. Confirm that the AC power source is functioning correctly. 3. Ensure the switch's ambient temperature is within the acceptable range and that the power module has good ventilation. Overheating can cause the power module to shut down as a protective measure.
B
Bradley MoranAug 4, 2025
What to do if there is RPS input failure on H3C S5560X-EI Switch?
- M
  Michael JohnsonAug 4, 2025
  If you're experiencing an RPS input failure with your H3C Switch, try the following: * First, verify that the switch is correctly connected to the RPS. * Next, confirm that the RPS is operating correctly. * Also, ensure that the ambient temperature of the switch is within the acceptable range and that the power module has sufficient ventilation, as overtemperature can cause the power module to stop working.
T
Tammy HarmonAug 11, 2025
What to do if there is no display on PC when using H3C Switch?
- S
  Suzanne RangelAug 11, 2025
  If you're experiencing a blank screen when trying to connect to your H3C Switch, there are a few things you can check: * First, make sure the power module is properly supplying power to the switch. * Next, verify that the console cable is correctly connected. * Also, ensure the console cable itself is working correctly and that your PC settings are properly configured.
B
Brian EdwardsAug 19, 2025
How to fix garbled display on PC when using H3C S5560X-EI Switch?