29
With the information center, you can set log message filtering and output rules, including output
destinations. For more information about configuring the information center, see Network
Management and Monitoring Configuration Guide.
Examples
# Enable local-MAC logging.
<Sysname> system-view
[Sysname] vxlan local-mac report
vxlan tunnel mac-learning disable
Use vxlan tunnel mac-learning disable to disable remote-MAC address learning.
Use
undo vxlan tunnel mac-learning disable to enable remote-MAC address learning.
Syntax
vxlan tunnel mac-learning disable
undo vxlan tunnel mac-learning disable
Default
Remote-MAC address learning is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When network attacks occur, use this command to prevent the device from learning incorrect remote
MAC addresses in the data plane.
Examples
# Disable remote-MAC address learning.
<Sysname> system-view
[Sysname] vxlan tunnel mac-learning disable
vxlan udp-port
Use vxlan udp-port to set the destination UDP port number for VXLAN packets.
Use
undo vxlan udp-port to restore the default.
Syntax
vxlan udp-port port-number
undo vxlan udp-port
Default
The destination UDP port number is 4789 for VXLAN packets.
Views
System view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General