H3C S5560X-EI Series Command Reference

47
Predefined user roles
network-admin
Parameters
domain-name: Specifies a PKI domain name, a case-sensitive string of 1 to 31 characters. The PKI
domain must already exist and contain a complete certificate and key.
Usage guidelines
To communicate with controllers through SSL, you must specify a PKI domain.
For the specified PKI domain to take effect, you must execute the
ovsdb server enable
command to enable the OVSDB server. You must disable and then re-enable the OVSDB server if it
has been enabled.
For more information about PKI domains, see PKI in Security Configuration Guide.
Examples
# Specify PKI domain ovsdb_test for establishing OVSDB SSL connections.
<Sysname> system-view
[Sysname] ovsdb server pki domain ovsdb_test
Related commands
ovsdb server bootstrap ca-certificate
ovsdb server enable
ovsdb server pssl
ovsdb server ssl
ovsdb server pssl
Use ovsdb server pssl to enable the device to listen for OVSDB SSL connection requests.
Use
undo ovsdb server pssl to restore the default.
Syntax
ovsdb server pssl [ port port-number ]
undo ovsdb server pssl
Default
The device does not listen for OVSDB SSL connection requests.
Views
System view
Predefined user roles
network-admin
Parameters
port port-number: Specifies a port to listen for OVSDB SSL connection requests. The value
range for the
port-number argument is 1 to 65535. If you do not specify a port, the device uses the
port number 6640.
Usage guidelines
Before you use this command, you must specify a PKI domain for SSL.

H3C S5560X-EI Series Specifications

General

Brand	H3C
Model	S5560X-EI Series
Category	Switch
Language	English