41
[Sysname] vsi vpna
[Sysname-vsi-vpna] gateway vsi-interface 100
Related commands
interface vsi-interface
interface vsi-interface
Use interface vsi-interface to create a VSI interface and enter its view, or enter the view of
an existing VSI interface.
Use
undo interface vsi-interface to delete a VSI interface.
Syntax
interface vsi-interface vsi-interface-id
undo interface vsi-interface vsi-interface-id
Default
No VSI interfaces exist.
Views
System view
Predefined user roles
network-admin
Parameters
vsi-interface-id: Specifies a VSI interface number. The value range for this argument is 0 to
16777215.
Usage guidelines
When you delete a VSI interface by using the undo interface vsi-interface command, the
gateway interface setting of the VSI interface is also deleted.
Examples
# Create VSI-interface 100 and enter VSI interface view.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100]
Related commands
gateway vsi-interface
ipv6 nd distributed-gateway dynamic-entry synchronize
Use ipv6 nd distributed-gateway dynamic-entry synchronize to enable dynamic
ND entry synchronization for distributed VXLAN IP gateways.
Use
undo ipv6 nd distributed-gateway dynamic-entry synchronize to disable
dynamic ND entry synchronization for distributed VXLAN IP gateways.
Syntax
ipv6 nd distributed-gateway dynamic-entry synchronize
undo ipv6 nd distributed-gateway dynamic-entry synchronize
To Next Page
Loading...
Need help?
General