H3C S5560X-EI Series Command Reference

35
default
Use default to restore the default settings for a VSI interface.
Syntax
default
Views
VSI interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The
default command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions.
To resolve this problem:
1. Use the
display this command in interface view to identify these commands.
2. Use their
undo forms or follow the command reference to restore their default settings.
3. If the restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings for VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to configure the description of a VSI interface.
Use
undo description to restore the default.
Syntax
description text
undo description
Default
The description of a VSI interface is interface-name plus Interface (for example, Vsi-interface100
Interface).
Views
VSI interface view
Predefined user roles
network-admin

H3C S5560X-EI Series Specifications

General

Brand	H3C
Model	S5560X-EI Series
Category	Switch
Language	English