H3C S5560X-EI Series Command Reference

8
Total number of ACs: 2, 2 up, 0 down
Interface SrvID Owner LinkID State Type
GE1/0/1 3 vsi12 1 Up VSI
GE1/0/1 4 vsi13 1 Up VSI
Table 5 Command output
Field
Description
Total number of ACs
Total number of attachment circuits (ACs) and the number of ACs in each state
(up or down).
Interface Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.
SrvID Ethernet service instance ID.
Owner
VSI name. This field is empty if an Ethernet service instance is not mapped to
any VSI.
LinkID Ethernet service instance's link ID on the VSI.
State
Ethernet service instance state:
• Up.
•
Down
.
Type
L2VPN type of the Ethernet service instance:
• VSI.
• VPWS.
# Display detailed information about all Ethernet service instances on GigabitEthernet 1/0/1.
<Sysname> display l2vpn service-instance interface gigabitethernet 1/0/1 verbose
Interface: GE1/0/1
Service Instance: 1
Type : Manual
Encapsulation : s-vid 16
Bandwidth : Unlimited
VSI Name : vsi10
Link ID : 1
State : Up
DF state : BDF
Statistics : Enabled
Input Statistics:
Octets :0
Packets :0
Output Statistics:
Octets :0
Packets :0
Table 6 Command output
Field
Description
Interface Name of a Layer 2 Ethernet interface or Layer 2 aggregate interface.
Service Instance Ethernet service instance ID.
Type
Type and traffic match mode of the Ethernet service instance:
• Dynamic (MAC-based)—Dynamic Ethernet service instance in MAC-based

H3C S5560X-EI Series Specifications

General

Brand	H3C
Model	S5560X-EI Series
Category	Switch
Language	English