27
Figure 35 Connecting the PSR150-D1
Figure 36 Connecting the PSR560-56D
Connecting the PSR360-56A/PSR720-56A/PSR1110-56A
The power cord connection procedure is the same for the PSR360-56A, PSR720-56A, and
PSR1110-56A power modules. The following procedure uses the PSR720-56A power module as an
example.
To connect the PSR720-56A:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2. Plug the female connector end of the AC power cord into the AC-input power receptacle of the
power module (see callout 1 in Figure 37).
3. Use a cable tie to secure the power cord to the handle of the power module (see callout 2 and
callout 3 in Figure 37).
4. Connect the other end of the AC power cord to an AC power source.
To Next Page
Loading...
Need help?
General