H3C S5560X-EI Series - 1;10 BASE-T Autosensing Ethernet Port; 5 G;2.5 G;1000 BASE-T Autosensing Ethernet Port

67
1/10BASE-T autosensing Ethernet port
The LSWM2XGT2PM interface card provides 1/10BASE-T autosensing Ethernet ports.
Table 20 1/10BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes 1/10 Gbps, full duplex, MDI/MDI-X auto-sensing
Max transmission distance
• Category-6 UTP—55 m (180.45 ft)
• Category-6 STP—100 m (328.09 ft)
• Category-6 SFTP—100 m (328.09 ft)
• Category-6 and above twisted pair—100 m (328.09 ft)
Transmission medium Category-6 (or above) twisted pair cable
Standards IEEE 802.3an, 802.3ab
10/100/1000BASE-T autosensing Ethernet port
All the S5560X-EI switch models, except the S5560X-54F-EI switch, provide 10/100/1000BASE-T
autosensing Ethernet ports.
Table 21 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab
5G/2.5G/1000BASE-T autosensing Ethernet port
The LSWM2MGT8P interface card provides 5G/2.5G/1000BASE-T autosensing Ethernet ports.
Table 22 5G/2.5G/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Port speed, duplex mode,
MDIX mode
1/2.5/5 Gbps, full duplex, auto-MDI/MDIX