EasyManuals Logo

H3C S5560X-EI Series User Manual

H3C S5560X-EI Series
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
70
GE SFP
transceiver
module and
cable
Central
wavelength
(nm)
Connector
Cable/Fiber
type and
diameter (µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
SFP-GE-LH40-
SM1310
1310 LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
SFP-GE-LH40-
SM1310
1310 LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
SFP-GE-LH40-
SM1550
1550 LC
Single-mode,
9/125
N/A
40 km (24.86
miles)
SFP-GE-LH80-
SM1550
1550 LC
Single-mode,
9/125
N/A
80 km (49.71
miles)
SFP-GE-LH80-
SM1550-D
1550 LC
Single-mode,
9/125
N/A
80 km (49.71
miles)
SFP-GE-LH100
-SM1550
1550 LC
Single-mode,
9/125
N/A
100 km (62.14
miles)
SFP-GE-LX-SM
1310-BIDI
TX: 1310
RX: 1490
LC
Single-mode,
9/125
N/A 10 km (6.21 miles)
SFP-GE-LX-SM
1490-BIDI
TX: 1490
RX: 1310
LC
Single-mode,
9/125
N/A 10 km (6.21 miles)
SFP cable
SFP-STACK-Kit N/A 1.5 m (4.92 ft)
IMPORTANT:
The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI modules must be used in pairs.
To install multiple SFP-GE-LH100-SM1550 transceiver modules on the S5560X-30C-EI,
S5560X-30F-EI, and S5560X-54F-EI switches, separate these transceiver modules by other
types of transceiver modules. For example, you can install SFP-GE-LH100-SM1550 transceive
r
modules in ports 1 and 2, other types of transceiver modules in ports 3 and 4, and
SFP-GE-LH100-SM1550 transceiver modules in ports 5 and 6.
NOTE:
As a best practice, use H3C transceiver modules and cables for the switch.
The H3C transceiver modules and cables are subject to change over time. For the most recent
list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
For more information about H3C transceiver modules and cables, see H3C Transceiver Modules
User Guide.
SFP+ port
The switch provides four fixed SFP+ ports on the front panel. To connect peer SFP+ ports over a long
distance, use SFP/SFP+ transceiver modules and fibers. To connect peer SFP+ ports over a short
distance, use SFP/SFP+ cables. You can install the GE SFP transceiver module and cables in Table
25, 10-GE SF
P+ transceiver modules in Table 26, an
d 10-GE SFP+ cables in Table 27 in the SFP+
ports.

Table of Contents

Other manuals for H3C S5560X-EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S5560X-EI Series and is the answer not in the manual?

H3C S5560X-EI Series Specifications

General IconGeneral
BrandH3C
ModelS5560X-EI Series
CategorySwitch
LanguageEnglish

Related product manuals