H3C S5560X-EI Series User Manual

68
Item Specification
Transmission medium and max
transmission distance
• 5G mode:
{ Category-5e UTP—55 m (180.45 ft)
{ Category-5e STP—100 m (328.09 ft)
{ Category-6 twisted pair—100 m (328.09 ft)
{ Category-6e twisted pair—100 m (328.09 ft)
• 2.5G mode: 100 m (328.09 ft) over Category-5e and above twisted
pair cable
Standards IEEE 802.3ab, 802.3an
10G/5G/2.5G/1000BASE-T autosensing Ethernet port
The LSWM2XMGT8P interface card provides 10G/5G/2.5G/1000BASE-T autosensing Ethernet
ports.
Table 23 10G/5G/2.5G/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Speed, duplex mode, and
MDIX mode
1/2.5/5/10 Gbps, full duplex, auto-MDI/MDIX
Transmission medium and max
transmission distance
• 10G mode:
{ Category-6 UTP—55 m (180.45 ft)
{ Category-6 STP—100 m (328.09 ft)
{ Category-6e twisted pair—100 m (328.09 ft)
• 5G mode:
{ Category-5e UTP—55 m (180.45 ft)
{ Category-5e STP—100 m (328.09 ft)
{ Category-6 twisted pair—100 m (328.09 ft)
{ Category-6e twisted pair—100 m (328.09 ft)
• 2.5G mode: 100 m (328.09 ft) over Category-5e and above twisted
pair
Standards IEEE 802.3ab, 802.3an
SFP port
The S5560X-30C-EI, S5560X-30F-EI, S5560X-54F-EI, and S5560X-34S-EI switches provide 8, 24,
48, and 4 fixed SFP ports on the front panel, respectively.
You can install the FE SFP modules in Table 24
and GE SFP transceiver modules and cables
in Table 25 in the SFP
ports.
Table 24 FE SFP transceiver modules available for the SFP ports
FE SFP module
Central
wavelength
(nm)
Connector
Fiber diameter
(µm)
Max
transmission
distance
SFP-FE-SX-MM1310-A 1310 LC
Multi-mode, 50/125
2 km (1.24 miles)
Multi-mode, 62.5/125

H3C S5560X-EI Series Specifications

General

Brand	H3C
Model	S5560X-EI Series
Category	Switch
Language	English