H3C S5830V2 Series User Manual

44
Switch model LSVM1AC300 LSVM1DC300 LSVM1AC650 LSVM1DC650
S5820V2-52QF-U Yes Yes Yes Yes
S5820V2-54QS-GE Yes Yes Yes Yes
S5820V2-52Q No No Yes Yes
NOTE:
• When a switch has two power modules for redundancy, you can replace a power module without
powering off the switch. Make sure the power module to be replaced is powered off before you
replace it.
• Do not install LSVM1AC300/LSVM1DC300 and LSVM1AC650/LSVM1DC650 power modules
on the same switch.
Fan trays
Table 8 Fan tray specifications
Item Specifications
LSWM1FANSC (for the 5820V2-48S/S5820V2-52QF/S5820V2-52QF-U/S5820V2-54QS-GE
switch)
Fans Two 40 × 40 × 28 mm (1.57 × 1.57 × 1.1 in) fans
Fan speed 18500 R.P.M
Max airflow 45 CFM
Airflow direction
Back to front (Fans blow air from the power module side to the network port
side.)
Input voltage 12 V
Maximum power consumption 19.5 W
Documentation reference
H3C LSWM1FANSC & LSWM1FANSCB Installation Manual
LSWM1FANSCB (for the 5820V2-48S/S5820V2-52QF/S5820V2-52QF-U/S5820V2-54QS-GE
switch)
Fans Two 40 × 40 × 28 mm (1.57 × 1.57 × 1.1 in) fans
Fan speed 18500 R.P.M
Max airflow 45 CFM
Airflow direction
Front to back (Fans draw air from the network port side to the power
module side.)
Input voltage 12 V
Maximum power consumption 19.5 W
Documentation reference
H3C LSWM1FANSC & LSWM1FANSCB Installation Manual
LSWM1HFANSC (for the S5820V2-52Q switch)
Fans Two 40 × 40 × 56 mm (1.57 × 1.57 × 2.2 in) fans
Fan speed 21000 R.P.M
Max airflow 70 CFM

H3C S5830V2 Series Specifications

General

Brand	H3C
Model	S5830V2 Series
Category	Switch
Language	English