42
2. Power on the switch.
During the startup process, you can access BootWare menus to perform tasks such as
software upgrade and file management. The BootWare interface and menu options vary by
software version. For more information about BootWare menu options, see the
software-matching release notes for the device.
3. After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see H3C S6850 & S9850
Switch Series Configuration Guides and H3C S6850 & S9850 Switch Series Command
References.
To Next Page
Loading...
Need help?
General