H3C WX Series Configuration Guide

13
Configuring an ACL
Creating a time range
Follow these steps to create a time range:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Create a time range
time-range
time-range-name
{ start-time to end-time days
[ from time1 date1 ] [ to
time2 date2 ] | from time1
date1 [ to time2 date2 ] | to
time2 date2 }
Required
By default, no time range
exists.
You may create time ranges identified with the same name. They are regarded as one
time range whose active period is the result of ORing periodic ones, ORing absolute
ones, and ANDing periodic and absolute ones.
You may create a maximum of 256 uniquely named time ranges, each with 32 periodic
time ranges at most and 12 absolute time ranges at most.
Configuring a WLAN ACL
WLAN ACLs match packets based on SSIDs of wireless clients.
Follow these steps to configure a WLAN ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Create a WLAN ACL and
enter its view
acl number acl-number
Required
By default, no ACL exists.
WLAN ACLs are numbered in
the range 100 to 199.
Configure a description for
the WLAN ACL
description text
Optional
By default, a WLAN ACL has
no ACL description.
Set the rule numbering step
step step-value
Optional
5 by default

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English