H3C WX Series Configuration Guide

20
The source IPv4 or IPv6 ACL already exists but the destination IPv4 or IPv6 ACL does
not.
Copying an IPv4 ACL
Follow these steps to copy an IPv4 ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Copy an existing IPv4 ACL to
create a new IPv4 ACL
acl copy
{ source-acl-number | name
source-acl-name } to
{ dest-acl-number | name
dest-acl-name }
Required
The name keyword is not
available for WLAN ACLs
Copying an IPv6 ACL
Follow these steps to copy an IPv6 ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Copy an existing IPv6 ACL to
generate a new one of the
same category
acl ipv6 copy
{ source-acl6-number |
name source-acl6-name } to
{ dest-acl6-number | name
dest-acl6-name }
Required
Displaying and maintaining ACLs
To do...
Use the command…
Remarks
Display configuration and
match statistics for one or all
IPv4 ACLs
display acl { acl-number | all | name
acl-name }
Available in any
view
Display configuration and
match statistics for one or all
IPv6 ACLs
display acl ipv6 { acl6-number | all |
name acl6-name }
Available in any
view
Display the configuration
and status of one or all time
ranges
display time-range
{ time-range-name | all }
Available in any
view
Clear statistics on one or all
IPv4 ACLs
reset acl counter { acl-number | all |
name acl-name }
Available in user
view
Clear statistics on one or all
IPv6 basic and advanced
ACLs
reset acl ipv6 counter { acl6-number |
all | name acl6-name }
Available in user
view

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English