H3C WX Series Configuration Guide

38
Configuring a priority mapping table
Configuring a port to trust packet priority for priority mapping
Configuring the port priority of a port
Configuring priority mapping
Configuring a priority mapping table
The AC provides various types of priority mapping table, as listed below.
dot11e-lp: 802.11e-to-local priority mapping table.
dot1p-lp: 802.1p-to-local priority mapping table.
dscp-lp: DSCP-to-local priority mapping table, which is applicable to only IP
packets.
lp-dot11e: Local-to-802.11e priority mapping table.
lp-dot1p: Local-to-802.1p priority mapping table.
lp-dscp: Local-to-DSCP priority mapping table.
Follow these steps to configure a priority mapping table:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter priority mapping
table view
qos map-table
{ dot11e-lp | dot1p-lp
| dscp-lp | lp-dot11e
| lp-dot1p | lp-dscp }
Required
Enter the view of the priority mapping
table to be modified.
Support of the H3C WX series access
controllers for priority mapping tables may
vary by AC model. For more information,
see Compatibility Matrices.
Configure the priority
mapping table
import
import-value-list
export export-value
Required
Newly configured mappings overwrite the
old ones.
Display the
configuration of the
priority mapping
table
display qos
map-table
[ dot11e-lp | dot1p-lp
| dscp-lp | lp-dot11e
| lp-dot1p | lp-dscp ]
Optional
Available in any view

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English