H3C WX Series Configuration Guide

14
To do…
Use the command…
Remarks
Create or edit a rule
rule [ rule-id ] { permit |
deny } [ ssid ssid-name ]
Required
By default, a WLAN ACL
does not contain any rule.
To create or edit multiple
rules, repeat this step.
Configure or edit a rule
description
rule rule-id comment text
Optional
By default, a WLAN ACL rule
has no description.
Configuring a basic ACL
Configuring an IPv4 basic ACL
IPv4 basic ACLs match packets based on only source IP address.
Follow these steps to configure an IPv4 basic ACL:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Create an IPv4 basic ACL
and enter its view
acl number acl-number
[ name acl-name ]
[ match-order { auto |
config } ]
Required
By default, no ACL exists.
IPv4 basic ACLs are
numbered in the range 2000
to 2999.
You can use the acl name
acl-name command to
enter the view of an existing
named IPv4 ACL.
Configure a description for
the IPv4 basic ACL
description text
Optional
By default, an IPv4 basic
ACL has no ACL description.
Set the rule numbering step
step step-value
Optional
5 by default

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English