H3C WX Series Configuration Guide

33
Applying the QoS policy to online users
You can apply a QoS policy to traffic of multiple online users, but only one policy can be
applied in one traffic direction. To modify a QoS policy already applied in a certain
direction, remove the QoS policy application first.
Follow these steps to apply the QoS policy to online users:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter user profile view
user-profile profile-name
Required
The configuration made in
user profile view takes
effect when the user-profile
is activated and there are
online users.
For more information about
user profiles, see User Profile
in the Security
Configuration Guide.
Apply the QoS policy
qos apply policy policy-name
{ inbound | outbound }
Required
Use the inbound keyword to
apply the QoS policy to the
traffic received by the
online users. Use the
outbound keyword to apply
the QoS policy to the traffic
sent by the online users.
Return to system view
quit
—
Activate the user profile
user-profile profile-name
enable
Required
Inactive by default
NOTE:
If a user profile is active, the QoS policy applied to it cannot be configured or removed,
except ACLs referenced in the QoS policy. However, when the users of the user profile are
online, the referenced ACLs cannot be modified either.
The QoS policies applied in user profile view support only the remark, car, and filter actions.
Do not apply a null policy in user profile view, because you cannot activate a user profile with
a null policy applied.

H3C WX Series Specifications

General

Brand	H3C
Model	WX Series
Category	IP Access Controllers
Language	English